全部

1·They hitched a ride in a truck.

他们搭乘了一辆路过的货车。《牛津词典》

2·She hitched a lift on a truck.

她免费搭乘了一辆卡车。《牛津词典》

3·I've just loaded my truck up.

我刚刚装完我的卡车。《柯林斯英汉双解大词典》

4·The truck sputtered and stopped.

该卡车噼啪响了响，就停下了。《柯林斯英汉双解大词典》

5·The truck braked to a halt.

那辆卡车刹住了。《牛津词典》

6·Caution! This truck is reversing.

小心！卡车在倒车。《牛津词典》

7·The truck hit a bump and bounced.

卡车开到了路面上一块隆起的地方，颠簸起来。《柯林斯英汉双解大词典》

8·They were parked behind the truck.

它们被停在了卡车后面。《柯林斯英汉双解大词典》

9·He pulled out to overtake a truck.

他驶出车流，以超过一辆卡车。《牛津词典》

10·A truck came belting up behind us.

一辆货车从我们后方飞驰而来。《牛津词典》

卡车

1·The truck sputtered and stopped.

该卡车噼啪响了响，就停下了。《柯林斯英汉双解大词典》

2·He raised the bonnet of McKee's truck.

他把麦基卡车的引擎罩打开了。《柯林斯英汉双解大词典》

3·Sacks were being loaded onto the truck.

人们正在把麻袋装上卡车。《牛津词典》

4·There was a thump as the truck hit the bank.

卡车撞在马路边坡上，发出砰的一声巨响。《牛津词典》

5·The truck fishtailed when Bruun hit the brake.

当布隆踩刹车时，卡车摆尾行驶。《柯林斯英汉双解大词典》

载货汽车

1·Volvo currently in Belgium, the Netherlands, Canada, Australia, Malaysia and Thailand have a car assembly plants in Brazil, Peru, the United States has Truck and bus assembly plants.

目前沃尔沃在比利时、荷兰、加拿大、澳大利亚、马来西亚、泰国都设有轿车组装厂，在巴西、秘鲁、美国设有载货汽车和客车组装厂。

2·Fuel economy is one of the important performance target for the cargo truck.

燃油经济性是载货汽车最重要的性能指标之一。

3·This topic combined production with the actual and based on the agriculture transport vehicle foundation, the low speed truck frame and suspension system have been designed.

本课题结合生产实际，在农用运输车的基础上对低速载货汽车车架及悬架系统进行了设计。

4·This article studies based on light truck driver axle of QX1060, discusses in detail from the UG software parametric modeling, establish of ANSYS FEM model, and the boundary conditions imposed, etc.

本文以轻型载货汽车驱动桥壳为研究对象详细论述了从UG软件中的参数化建模到ANSYS中有限元模型的建立、边界条件的施加等研究。

5·According to the conclusions above, the loaded and unloaded space curve I of heavy-duty truck built in this paper were acquired.

利用得出的结论得到了本文所研究重型载货汽车的空间I曲线计算公式。

载货车

1·This paper demonstrates residual stress of induction quench parts and personal views about stress distribution of flange corner heat treatment, truck half axle material and depth of hardened layer.

论述了感应淬火零件的残余应力形态，并对载货车半轴的材料、硬化层深度及法兰圆角淬火层分布提出了个人见解。

2·Claim statistical data indicated that truck clutch release bearing had high failure rate, the failure mode including abnormal noise, ablation, oil starvation and wear of bearing block shoulder, etc.

统计近几年的三包索赔产品看出，某载货车离合器分离轴承的故障率一直居高不下，主要故障形式有轴承异响、烧蚀、缺油、轴承座耳台肩磨损等。

转向架

1·This paper briefly introduces the basic structure of the radial truck for tilting car and analyzes the primary principle of the force steering bogie.

简要介绍了摆式客车迫导向径向转向架的基本结构，并分析了迫导向径向转向架的基本原理。

手推车

1·we’re gonna find it, ” Nick says as Lucasz pulls the hand truck across the street.

我们会找到的，”Nick说着，Lucasz拉着手推车走过街道。

2·Move cylinders using a suitable hand truck or cart.

用合适的手推车或移动钢瓶。

载重汽车

1·The control system provides reasonable solution of the integration of brake control system and other control system of truck's batholith.

为实现制动控制系统与载重汽车底盘其它控制系统的一体化和集成化奠定了基础。

2·The integrated control system of truck's assistant brakes based on CAN-Bus is developed.

设计了基于CAN的载重汽车制动集中控制系统。

3·The scene each kind of inspection well lap and the blind ditch lap in prefabricate in the field to prefabricate, truck transportation, crane loading and unloading, artificial auxiliary.

现场各类检查井盖板及暗沟盖板在预制场内预制，载重汽车运输、吊车装卸，人工辅助。

大货车

1·Action to investigate the basis of the information, the so-called AIDS Society is overloaded truck drivers to spend money to employ large, the tools used to avoid punishment.

根据这次行动调查的信息，所谓的“艾滋病协会”是超载大货车司机花钱聘请，用来逃避处罚的工具。

(1)heavy truck重型卡车

(1)dump truck自动倾卸卡车

(1)truck driver卡车司机

(1)light truck轻型货车，轻型卡车；轻型载货汽车

(1)forklift truck铲车；叉式举升车辆

(1)by truck卡车装运；乘卡车