全部

1·There's mould on the cheese.

干酪发霉了。《牛津词典》

2·The molten metal is poured into the mould.

这块熔化了的金属被倒入模子。《柯林斯英汉双解大词典》

3·A clay mould is used for casting bronze statues.

用黏土模具来浇铸青铜塑像。《牛津词典》

4·Mould the mixture into shape while hot, before it hardens.

在混合物变硬之前，趁热将其塑造成形。《柯林斯英汉双解大词典》

5·He would dampen the clay and begin to mould it into an entirely different shape.

他把黏土弄湿，然后着手把它塑造成一个完全不同的形状。《柯林斯英汉双解大词典》

6·As the days passed, a damp black mould began to grow on him.

随着日子一天天过去，潮湿的黑霉菌开始在他身上生长。

7·It is a healthy lifestyle and will help mould a harmonious social atmosphere.

它是一种健康的生活方式，将有助于塑造一种和谐的社会氛围。

8·Third, it is a healthy lifestyle and will help mould a harmonious social atmosphere.

第三，它是一种健康的生活方式，将有助于塑造一种和谐的社会氛围。

9·It is our legal obligation to make sure that clothes that contain mould are destroyed.

我们要确保那些带有霉菌的衣服被销毁掉，这是我们的法律责任。

10·He could never be accused of fitting the mould.

他永远都不可能被指责属于这个类型。《柯林斯英汉双解大词典》

模具

1·A clay mould is used for casting bronze statues.

用黏土模具来浇铸青铜塑像。《牛津词典》

2·He explains how he begins with a mould of the subject's face or body and then carves exquisite, lifelike details to create the finished chocolate portrait.

他解释如何从一个对象面部、身体的模具开始，再通过精致的雕刻，栩栩如生的细节来创造成品的巧克力肖像。

3·Today only one mould, of recent manufacture is used and none of the older moulds has been kept for posterity.

而现今只有一个最近制造的模具仍在使用，旧模具一个都没有保留下来。

4·First, the carbon cloth goes into the mould dry, rather than pre-impregnated with resin.

第一，碳织物进入模具时是干的，而非事先饱含树脂。

5·Party a shall possess the ownership of the mould.

模具的所有权归甲方所有。

模

1·Compared with other processes, such as pouring molten metal into an open mould, HPDC is fast and cheap.

与将液态金属注入开模的工艺等工艺相比，HPDC工艺很快，并且很便宜。

2·Graphite blade and graphite mould used in the production of synthetic polycrystalline mass are made from graphite bar.

生产人造金刚石聚晶所需的石墨片和石墨模是用石墨棒加工的。

3·If needed, organize a new review meeting according to above requirements for mould first draft review.

若需再次评审，则按以上模图初稿评审要求重新组织评审。

4·Designing and manufacturing sheet metal tool, injection mould, and more.

可进行冷冲模和注射模等各类模具的设计与制造。

5·The design process of plastic wye injection mould is stated in detail from the analysis of plastic part , the analysis of the process and the design of the struction.

从塑件分析、工艺分析、结构设计三方面详细阐述了常见塑料三通注射模的设计过程。

塑造

1·He would dampen the clay and begin to mould it into an entirely different shape.

他把黏土弄湿，然后着手把它塑造成一个完全不同的形状。《柯林斯英汉双解大词典》

2·It is a healthy lifestyle and will help mould a harmonious social atmosphere.

它是一种健康的生活方式，将有助于塑造一种和谐的社会氛围。

3·Third, it is a healthy lifestyle and will help mould a harmonious social atmosphere.

第三，它是一种健康的生活方式，将有助于塑造一种和谐的社会氛围。

4·Mould the mixture into shape while hot, before it hardens.

在混合物变硬之前，趁热将其塑造成形。《柯林斯英汉双解大词典》

5·They know it so well that they can “swim” in it, mould it and control it.

他们掌控得足够好以至于能够“穿梭”其中，塑造它，控制它。

霉菌

1·As the days passed, a damp black mould began to grow on him.

随着日子一天天过去，潮湿的黑霉菌开始在他身上生长。

2·It is our legal obligation to make sure that clothes that contain mould are destroyed.

我们要确保那些带有霉菌的衣服被销毁掉，这是我们的法律责任。

3·There is a film of mould over the bottle cap.

瓶盖上有一层薄薄的霉菌。《新英汉大辞典》

4·But as the days passed, a damp black mould began to grow on him.

但随着日子一天天过去，潮湿的黑霉菌开始在他身上生长。

5·Fleming proceeded to isolate an extract from the mould, correctly identified it as being from the Penicillium genus, and therefore named the agent penicillin.

弗莱明继续从霉菌中分离出它的提取物，然后确定它是青霉属中的一种，从而把这种提取物命名为青霉素。

模子

1·Press dough ball into the mooncake mould.

将面团球放进月饼模子。

2·Whether Nature has acted rightly or wrongly in destroying the mould in which she cast me, can only be decided after I have been read.

大自然打破了它塑造我的模子究竟是正确或者错误，只有读了我这本书才能评定。

3·He is a very clever player in the mould of Dani Pacheco and he is very exciting to watch.

他是一名非常聪明的球员，就像和丹尼·帕切科一个模子出来的那样，看他的比赛真是令人兴奋。

4·Not all entrepreneurs are cast in the same mould.

并不是所有的企业家都是一个模子里刻出来的。

5·The metal in the mould hardened into shape.

模子里的金属硬化成形。

型

1·Origination of casting defects in aluminum alloy motorcycle damping cylinder in metal mould casting was analyzed.

分析了金属型铸造铝合金摩托车减震筒铸造缺陷的产生原因。

2·The composition and properties of plaster mould have been introduced, and the technological process and applied characteristics of plaster mould investment casting is discussed.

介绍了石膏原材料的组成和性能，阐述了石膏型熔模铸造的工艺过程。

3·At the end, the paper posted the problems which needed to be solved in non-sleeve technique, and also provided Suggestions in selecting the solidification materials and designing mould.

最后，本文提出了无芯法连续生产空心钢锭技术需要解决的问题，以及在选定凝固材料和进行锭型设计时的参考意见。

4·The cast ingots prepared using sand mould and metal mould were analyzed to investigate the effect of cooling rates on morphologies and characters of M2C eutectic carbides in M2 high speed steel.

采用砂型和金属型铸造制备m 2高速钢铸锭，研究了冷却速度变化对高速钢m 2c共晶碳化物形态及性质的影响，探讨了M2C共晶碳化物形态变化的机理。

5·Amino acid composition assay was carried out on a Hitachi 835-50 mould automatic amino acid analyzer.

用日立835 - 50型氨基酸自动分析仪测定纤溶酶的氨基酸组成。

霉

1·According to their characteristics, adopt moisture, mould, rust and corrosion resisting measures to.

根据货物特性，采取防潮，防霉，防锈，防锈，防腐措施确保货物在到达目的地时完好无损没有受到腐蚀。

2·On a reusable razor, stubble and mould can collect in the space where the blade cartridge attaches to the handle.

在可重复使用的剃刀上，须茬和霉物都会聚集在刀头和刀柄衔接的部位上。

3·The control effect was 92.3% to peach mould core disease by spraying preparation of PB97 in the field.

田间小区采用PB97制剂对桃霉心病的防治效果为92 .3 % ，可有效地控制病害的发生。

4·Scientists grow large quantities of common mould.

科学家们培殖了大量的普通霉。

5·The effects of keeping fresh dosage, hot air sterilization and store condition on preventing mould of mooncakes were investigated.

研究了保鲜剂、干热杀菌和贮藏条件对月饼防霉保质的影响。

铸模

1·The approach presented in this paper has been partly applied in certain cast and plastic injection mould manufacturing company, and the effect is fairly good.

这些方法已在注塑模和压铸模的设计制造中得到部分应用，取得了很好的效果。

2·Based on analyzing die casting process of cover part, the authors discuss the main points of the design of die casting mould.

在分析端盖零件压铸工艺的基础上，论述了压铸模的设计要点。

3·Though mold CAE technology has already been used in injection mould and die casting mould design recently, there are still many problems.

近年来，模具CAE技术虽然已在注塑模、压铸模设计中得到应用，但仍存在不少问题。

4·There are four mould cavities and the gear-rack mechanism for the rotational automatic thread demoulding on the mould.

该压铸模一模四腔，带有齿轮-齿条传动旋转自动脱螺纹型芯机构。

5·When binding, the rubber hose will be treated by high temperature and high pressure mould. The bound file will never get loose for 20 years.

装订时，胶管经过高温和高压铸模处理，经装订后的文件绝不会松脱，持久力达二十年之久。

铸型

1·Results show that centrifugal field has an important influence on the filling process and melt fills the mould with variational cross section and inclined Angle.

结果表明，离心力场的施加对于充型过程有重要影响，熔体以变化的截面面积和倾角填充铸型。

2·This is the oldest method of mould production and relies heavily on the skill of the molder.

这是最古老的铸型生产方法，主要依靠造型工的技巧。

3·A displacement sensor based on solenoid principle is used to measure green sand compactibility and mould compaction.

基于螺线管原理的位移探测器用于完成型砂紧实率及铸型紧实度的快速检测。

4·The new water-based coating for cast steel was developed by using the theory of mould coating.

本文应用铸型涂料的理论研究了新的铸钢水基涂料。

5·The research on new mould and core coatings has been based on the theory of rheology so far.

迄今为止，对新型铸型和型芯涂料的研究是以流变学理论为基础的。

(1)injection mould注塑模具

(1)mould design模具设计；铸模设计

(1)sand mould砂型；砂模

(1)steel mould钢模；钢锭模

(1)mould plate模板，模型板

(1)permanent mould永久模，硬模